/ 全部應用與量測特性 /
出版物

使用 LINSEIS 儀器的科學出版物

 

LINSEIS 的測量儀器可測試各種行業中各種材料的熱性能。收集的應用在我們的實驗室或由我們的客戶測量和評估。申請報告目前有英文版,部分也有德文版。我們會定期檢查外部鏈接。如果其中一個鏈接不起作用,則外部網站上的應用程序測量已被刪除。

以下應用程序分為設備組。請點擊相應的按鈕直接進入概覽。
 

Thermal Analysis: DSC, TGA, STA, DIL

APPLICATION INSTRUMENT PUBLISHED
Thermal analysis of butter and margarine Chip-DSC 10 evaluation (PDF)measured curve (PNG)
Thermal analysis of chocolate Chip-DSC 10 evaluation (PDF)measured curve (PNG)
Thermal analysis of Cholesterol Chip-DSC 100 evaluation (PDF)measured curve (PNG)
Thermal analysis with color change Chip-DSC 1 evaluation (PDF)
Thermal analysis of plastic bottles: PET and PE Chip-DSC 1 evaluation (PDF)
Thermal analysis of Polymers: Oxidation induction time (OIT) Chip-DSC 1 evaluation (PDF)
Thermal analysis of Polymers: Photo-DSC as a tool for UV-curing Chip-DSC 10 evaluation (PDF)
Thermal analysis of ABS Chip-DSC 1 evaluation (PDF)
Thermal analysis of PE Chip-DSC 1 evaluation (PDF)
Thermal analysis of PP Polypropylene Chip-DSC 1 evaluation (PDF)
Thermal analysis of PS Polystyrene Chip-DSC 1 evaluation (PDF)
Thermal analysis of phase change materials (PCM) inorganic salt HDSC PT 1600 evaluation (PDF)
PHOTO-DSC AS A VERSATILE TOOL FOR UV CURING SYSTEMS CHARACTERIZATION Chip-DSC with UV option Download Paper
Gamma-ray interaction with copper-doped bismuth–borate glasses DIL L74 Optical Physica B: Condensed Matter, Vol. 391
Effects of milling time on the development of porosity in Cu by the
reduction of CuO
DIL L74 Optical Download Paper
Thermal Properties of Alkali Activated Slag Plaster for Wooden Structures DIL L75 Horizontal Scientific Reports, Vol 10
Dilatometric model for determining the formation of austenite during continuous heating in medium carbon steel DIL L75 Vertikal Journal of Thermal Analysis and Calorimetry, Vol 137
Thermal expansion evolution of metastable β Ti-15Mo alloy during linear heating DIL L75 Vertikal IOP Conf. Series: Materials Science and Engineering, Vol. 461
Low Thermal Expansion of Ba0.5Sr0.5Co0.7Fe0.2Mn0.1O3- cathode Material DIL L76 International Journal of ELECTROCHEMICAL SCIENCE
Dilatometric Study of the Formation of Martensite and of the Effects of Stabilization of Austenite in High-Chromium Pipe Steel DIL L76 and DIL L78 RITA QDT Physics of Metals and Metallography, Vol. 120
Influence on martensite‐start‐temperature and volume expansion of low‐transformation‐temperature materials used for residual stress relief in beam welding DIL L78 Q Materials Science & Engineering Vol. 48
Sinter hardening material solutions for high performance applications DIL L78 Q Download Paper
Combustion Characteristics of Biomass Charcoals Produced at Different Carbonization Conditions. A Kinetic Study STA HP 1/2 Energy Fuels 2016, Vol. 30
New Copper(II) Coordination Compounds Assembled from Multifunctional Pyridine-Carboxylate Blocks: Synthesis, Structures, and Catalytic Activity in Cycloalkane Oxidation STA PT 1000 Molecules, Vol. 24
Synthesis and characterization of hydrophobic, ultra-fine fibres based on an organic–inorganic nanocomposite containing a polyimide functionality STA PT 1000 Polymers and Polymer Composites, Vol. 27
4-Azafluorenone and -Carboline Fluorophores with Green and Violet/Blue Emission STA PT 1600 Molecules, Vol. 13
GREEN CHEMISTRY FOR THE PREPARATION OF BIO-BASED OIL FROM CATFISH FAT USING A CAVITATION SYSTEM STA PT 1600 Rasayan J. Chem Vol. 12
Crystal structure, synthesis and thermal properties of bis(4-benzoylpyridine-jN)bis(isothiocyanatojN)
bis(methanol-jN)iron(II)
STA PT 1600 Acta Crystallographica Section
Asymmetric LSCF Membranes Utilizing Commercial Powders STA PT 1600 Materials Vol. 13
Characterization of an ilmenite ore for pressurized chemical looping combustion STA HP 2 Applied Energy, Vol. 163
Gasification kinetics during entrained flow gasification – Part I; Devolatilisation and char deactivation STA HP 2 FUEL, Vol. 103
Structurally optimized cupric oxide/polyaniline nanocomposites for efficient humidity sensing TGA PT 1000 Surfaces and Interfaces, Vol 18
Effect of Synthesis Oil Palm Mesocarp Fibre (PM) Biopolyol Incorporated with PM Waste Filler on Properties of Polyurethane Foam TGA PT 1000 J.Mech.Cont.& Math. Sci., Special Issue-1
Pine Resin Derivatives as Sustainable Additives to Improve the Mechanical and Thermal Properties of Injected Moulded Thermoplastic Starch TGA PT 1000 Journal of Applied Sciences Vol. 10
Natural Rubber/Dendrimer Modified Montmorillonite Nanocomposites: Mechanical and Flame-Retardant Properties TGA PT 1000 Materials Vol. 11